Nos marques:
Accessoires cables
Atoll
Audio Research
Avantgarde Acoustic
B&W
Cambridge Audio
Definitive Technology
Ecrans de cinéma
GKF
KEF
Magnepan
McIntosh
Mitsubishi
Naim Audio
Prima Luna
Primare
Project
Sonus Faber
Triangle
Velodyne
Wadia
Wilson Audio
L'auditorium:
Bonnes affaires
News
Salle d'écoute
Nos coups de cœur
Nos réalisations
Plan d’accès
McIntosh > Préamplificateur stéréo tubes C2300
Préamplificateur C2300 (PDF 0.2 Mo)
The C2300 uses Vacuum Tubes for amplifying the audio signal. The C2300 is designed to have only qualified Service Personnel perform any part(s) replacement including all the vacuum tubes. 2. For additional connection information, refer to the owner’s manual(s) for any component(s) connected to the C2300 Tube Preamplifier. 3. The Main AC Power going to the C2300 and any other McIntosh Component(s) should not be applied until all the system components are connected together. Failure to do so could result in malfunctioning of some or all of the system’s normal operations. When the C2300 and other McIntosh Components are in their Standby Power Off Mode, the Microprocessor’s Circuitry inside each component is active and communication is occurring between them. 4. Up to two Sensors can be wired in parallel for Remote Control of the C2300 from other rooms. 5. Balanced and Unbalanced Inputs and Outputs can be mixed. For example, you may connect signal sources to Unbalanced Inputs and send signals from the Balanced Outputs. You can also use Balanced and Unbalanced Outputs simultaneously, connected to different Power Amplifiers.
